Skip to content

Softener installs with no extras added on the day: (623) 920-0695

(623) 920-0695

Glendale Water Softeners, Priced Line by Line Before We Start

Water softener installation is our main work in Glendale. We also fit whole-home carbon filters, reverse osmosis at the kitchen sink and automated salt delivery. Before a single fitting comes loose, you see the parts, the labor and the price on paper. We cover nearby towns too, including Sun City and Litchfield Park.

Softeners, Filters and the Salt to Keep Them Going

Most of our work is water softener installation. Hard water leaves white crust on faucets and shower glass, and it builds scale inside water heaters and dishwashers where you can't see it. For chlorine taste and smell, we put in whole-home filtration. For the water you drink and cook with, a reverse osmosis system fits in the cabinet below the kitchen faucet, and automated salt delivery keeps the brine tank stocked so you never haul bags from the store.

  • Technician kneeling beside a black filter tank and two clear filter housings plumbed with white pipe and red-handled valves on a plywood board in a garage

    Whole-Home Filtration

    A filter on your main water line that cuts chlorine taste and smell at every faucet and shower, quoted in writing before any work begins.

  • Stack of white salt pellet bags on a garage floor beside an open black brine tank filled with salt and a blue water softener tank with a black control head

    Salt Delivery

    We haul the salt bags on a set schedule, fill your brine tank and check it for problems, so your softener keeps working.

  • Technician kneeling at a garage wall plumbing a blue water softener tank beside an open black brine tank of salt and a gas water heater, tool bag on the floor

    Water Softener Installation

    We size, plumb and start up a water softener in your home, with every part and labor item on paper before the first cut.

  • Technician kneeling at an open kitchen sink cabinet on a tile floor, installing three white filter canisters on a bracket beside a white pressure tank

    Reverse Osmosis System

    An under-sink reverse osmosis system for drinking and cooking water, installed neatly and quoted in writing before any work begins.

How We Run a Job

We are a small outfit, and every house gets the same routine. You see the plan and the cost before anything comes apart.

Every line on paper

We list the unit, the valve, the fittings, the labor and any extra plumbing. If a bypass or drain line needs work, it shows up as its own line. If it isn't listed, you don't pay for it.

A softener sized to your house

Too small and it runs out of capacity and regenerates over and over. Too big and it wastes salt and money. We go by the size of your household, the number of baths and the hardness of your supply, then choose a tank that matches.

Free warranty labor for salt subscribers

Keep an active salt delivery subscription with us and warranty labor is free. That's one less bill to think about if a valve or part ever needs work.

Your home stays clean

We lay down covers where we walk and work, catch water when we open lines, and haul off the old unit and the boxes. You get your garage or laundry room back the way it was, with a new system in it.

Straight answers on what you need

Some homes need a softener and a filter. Some need only one. We tell you which and why, and we leave it on paper so you can think it over without anyone waiting on you.

Where We Work

Glendale is home base. We install softeners and filters in Sun City, Sun City West, El Mirage, Youngtown, Surprise, Tolleson and Litchfield Park, and we take jobs in Phoenix, Tempe and Paradise Valley as well.

  • Glendale
  • Phoenix
  • Sun City
  • El Mirage
  • Tolleson
  • Youngtown
  • Litchfield Park
  • Sun City West
  • Paradise Valley
  • Tempe
  • Surprise

If you live just past these towns, ask by phone and we'll say plainly whether we can reach you. The Service Areas page lists more.

More on the areas we cover

10 miPhoenixSun CityEl MirageTollesonYoungtownLitchfield ParkSun City WestParadise ValleyTempeSurpriseGlendaleN

What Moves the Price

Every home is a little different, so we don't price from a menu. These are the things that change the number. Each one gets its own line on the estimate you receive, so you can see where the money goes.

We look at your setup, then write out each part and each step with its price. You decide with the full number in front of you, and nothing gets added on install day.

Size of the system
More people and more bathrooms mean more water through the softener each day. A bigger resin tank and brine tank cost more up front but regenerate less often, which saves salt over the years.
Your existing plumbing
Many houses here already have a softener loop in the garage. If yours does, the install is simpler. If not, we run new pipe to tie in, and that adds labor and material.
Drain and power access
A softener needs a drain for its backwash and an outlet for the control valve. When both are close, the job goes quickly. When they are not, we explain what it takes to reach them before you agree to anything.
Removing an old unit
Pulling out a worn-out softener, draining it and hauling it off takes time. We list it separately so you can see exactly what it adds.
Added filtration
A carbon filter ahead of the softener or a reverse osmosis system under the sink is a separate piece of equipment. You can add one now, later, or not at all.
Two technicians level a black brine tank beside a softener tank, filter housings and water heater in an open garage with desert landscaping outside

About Glendale Water Softener

We put in water softeners and keep them running for families around Glendale. Softeners are the core of the business. Filters, reverse osmosis and salt delivery round it out.

A common complaint in this trade goes like this: one price on the phone, then a longer list of extras once the old unit is out. We do it the other way. You know the scope and the cost before we pick up a tool.

Because we also handle salt delivery, we stay in touch with many of the systems we install long after install day. That keeps us careful about what we put in.

Warranty
Free warranty labor for active salt delivery subscribers

Questions We Hear Most

Something not covered here? (623) 920-0695

Do I really need a water softener?

If you keep scrubbing white crust off faucets, shower doors and dishes, hard water is the likely cause. Scale also builds up inside water heaters and appliances, where you can't see it. A softener stops most of that. If your main complaint is taste or smell, a filter may be the better fit, and we will tell you so.

What's the difference between a softener and a filter?

Softening deals with minerals. The resin inside a softener swaps out calcium and magnesium, the stuff that leaves scale, for a small amount of sodium, but it won't change how the water tastes. Chlorine taste and smell are a job for a whole-home carbon filter. For drinking and cooking water, a reverse osmosis system goes under the kitchen sink. Some homes need one of these, and some end up with all three.

What's on the price sheet you give me?

The make and size of the equipment, the fittings and pipe, any changes to your loop or drain, removal of an old unit, and the labor. Each item has its own line and its own price. If something isn't listed, it isn't part of the bill.

How often does a softener need salt?

It depends on the size of the system, your water use and how the valve is set. Most households refill every month or two. Our automated salt delivery brings salt on a schedule so the tank never runs dry and you never lift the bags yourself.

Do your installs come with a warranty?

Yes. Our installs carry a 2-year labor warranty. We'll go over what it covers when we talk through your price.

Can you take out my old softener?

Yes. We drain it, disconnect it and haul it away. That work shows up as its own line, so you see what it adds before you agree to it.

Will soft water taste salty?

Most people can't taste it. A softener adds a small amount of sodium as it works. If that bothers you, a reverse osmosis system at the kitchen sink removes most of it from your drinking water.

From First Call to Soft Water

Most jobs follow the same few steps. Here is what to expect.

  1. 1

    Talk it over by phone

    Tell us what you're seeing: spots on glass, crust on fixtures, a softener that quit or water that tastes off. We ask a few questions about your home and set a day to come out.

  2. 2

    A look at your setup

    Once we're there, we find where the main line enters your home and see if a softener loop is already in place. We note how close the drain and the outlet are. If an old unit is sitting there, we judge its condition and whether any part of it can stay.

  3. 3

    You get the price in writing

    Your written quote names the equipment, the work and the price. Take your time with it. Questions are fine, and so is saying no.

  4. 4

    Install day

    We cover the work area, shut off the water, set the new system and connect the bypass and drain. Then we program the valve, load salt and run a regeneration so you know it works before we leave.

  5. 5

    Cleanup and walkthrough

    We take away the old equipment and the packaging. Then we show you the bypass valve, where to check the salt level and what the settings mean.

Two blue whole-house filter housings and a stainless UV sterilizer with a wall-mounted controller, plumbed in white PVC on a garage wall beside a tank

See the Whole Job Before You Say Yes

Tell us what your water is doing and we'll set a time to look at your plumbing. You'll see every part and price spelled out before you decide.